Home > Notions > Favorite Helpers >

Panasonic 360 Freestyle Portable Iron With Ceramic Soleplate
Panasonic NI-WL602 Iron


List Price: $149.95
Price: $129.95

Stock Status:In Stock
Availability:: Usually Ships in 24 to 48 Hours

The very handy portable Panasonic NI-WL602 iron has so many great features!

  • The iron itself is cord free- so you never again have to put up with the cord getting in your way while you are pressing.
  • It is portable; at just 4.5 lbs it is easy to carry, and travels inside of its own heat-resistant carrying case. The cord retracts into the base, so you don't have to worry about it while you are toting your iron.
  • It gets really hot (hotter than the old version of the same iron) which means that it does a better and faster job pressing seams.
  • Both ends of the sole plate are pointed, so you can press in any direction with minimal turning and repositioning, and it is great for blocks that have seams going in multiple directions.
  • It has a non-stick ceramic-coated soleplate that distributes the heat more evenly and glides smoothly over your fabric.
  • It can produce steam when held vertically, so you can use it as a steamer too!

How it works:
This cord-free iron rests on and connects to a corded base. The base heats the iron up to a maximum temperature of 392 degrees in just 1 minute, and to use it you simply lift the iron off the base to and then replace it on the base when finished. After removing the iron from the base you can press for 2 minutes 30 seconds at the set temperature before it begins to cool, and you may press for a full 6 minutes before the iron reaches low. Every time iron is replaced on base it reheats.

Model: Panasonic NI-WL602
Detachable water tank for easy-filling.
Automatic- shut-off after 10 minutes.
Electronic temperature control and anti-drip system
Measurements: 11-1/2"L x 6-3/4"W x 8-1/4"H
Weight: 4.5 lbs.
Power:1500 Watts
Power 1500W

Prairie Pointer by Susan K. Cleveland Terial Magic Fabric Stabilizer 16 oz. Easy Dresden Template 8 inch 18° Ruler
Price: $19.99

Price: $12.95

Price: $7.50

Prairie Point Tool Terial Magic Fabric Stabilizer Dresden Template

Average Rating: 5 of 5 Total Reviews: 7 Write a review »

  0 of 0 people found the following review helpful:
The Little Iron That Can February 12, 2019
Reviewer: Jdaquilter from Colorado Springs, CO United States  
Great little iron for everything! Compact size, two pointed ends and it presses like its a full size iron.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Panasonic iron February 3, 2019
Reviewer: Cynthia Crull from Prescott Valley, AZ United States  
Love it. Have been Rob use it on his YouTube videos and have had iron envy!  I do stuff on my design wall and can have it on the desk plugged in,  but pick the iron and walk over to the wall to tack something down, with no cord to worry about. I'm off the leash so to speak.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
February 2, 2019
Reviewer: Mary Ann Kayackas from The Villages, FL United States  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
October 29, 2018
Reviewer: Sue Vaughan from Rockwall, TX United States  

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Love, love, love this iron! October 28, 2018
Reviewer: terrils from Cape Coral, FL United States  
A bit of a splurge, but the weight, ceramic sole plate and cordless features were too intriguing to pass up.  Perfect for piecing,  I am working on 2018 BOM (second color-way) and am loving the results!  I would also like to comment on the fabrics received - I can't recall every purchasing pre-cut fat quarters or a fat-quarter collection that has been as accurately cut as the ones I received from the TQS store.  Thank you all for your attention to detail. And keep doing what you do so very well.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Notions > Favorite Helpers
Notions > Pressing Aids
Notions > Precision Piecing